Updated July 2026
Custom Blinds in Uxbridge & Port Perry: What Homeowners Should Know
Zebra, roller and vertical blinds for farmhouse-style and lakefront windows in Uxbridge and Port Perry — installed pricing, lead times and why in-home measuring matters.
Get a Free Quote on WhatsApp
Send a photo of your window and get an estimate within 1 hour.
Uxbridge and Port Perry sit at the northern edge of the areas we cover across the Greater Toronto Area, and the homes there are different from the subdivisions further south. Century farmhouses, rebuilt country properties, and lakefront homes along Lake Scugog rarely have the standard 36- or 48-inch openings that a factory size chart assumes.
This guide covers what to expect when you order custom blinds in either town: the window styles we see most, why an in-home measure is not optional on these properties, what installed pricing actually looks like, and how a local installer compares with a national chain or an online-only retailer.
The windows we actually find in Uxbridge and Port Perry
Older farmhouse and century-home windows are tall and narrow, often 24 to 30 inches wide but 60 to 72 inches high, and set into deep wood casings that were built by hand. Frames are rarely square — a half-inch difference between the top and bottom of the same opening is normal, and that difference decides whether a shade is mounted inside or outside the casing.
Rebuilt and newer country homes go the other direction: wide great-room windows, 8-foot patio sliders onto a deck, and transoms or gable windows above the main glazing. Those wide openings often need to be split into two shades on one headrail so the fabric does not sag or roll unevenly.
Lakefront properties near Port Perry add glare and heat to the list. West-facing rooms over the water get strong late-day sun, which is where a 3% or 5% solar roller shade earns its keep — it cuts glare without blacking out the view you paid for.
Why the in-home consultation matters more here
On a square, modern opening a homeowner can measure accurately with a tape and a steady hand. On a 100-year-old casing, a bowed header, or a deep sill with a radiator under it, the measurement is only half the job — the mount decision is the other half, and that call is much easier to make standing in the room.
Larger windows also change the hardware. Past roughly 84 inches of width, tube diameter, chain rating and bracket spacing all have to step up, or the shade will deflect in the middle within a season. We spec that on site rather than guessing from a number typed into a form.
The consultation is free and covers the whole home, including the awkward openings people usually leave until later — stairwell windows, bathroom transoms, and patio doors.
Transparent installed pricing
Our pricing is published and includes measuring, the product, and professional installation — there is no separate trip charge for Uxbridge or Port Perry. Zebra and roller shades typically run $180–$320 per window, vertical blinds $220–$400, and motorized blinds $450–$900 depending on width and motor type.
Oversized farmhouse and great-room openings sit at the upper end of those ranges, and occasionally above them, because of the heavier tube and hardware. We quote the exact number before anything is ordered — see the full per-window breakdown on our pricing guide.
Lead time is 7–15 business days from approval to installation, with a 5-year workmanship warranty on the install plus the manufacturer's coverage on the product itself.
Local installer vs. chains and online-only retailers
National chains and online retailers sell the same broad product categories, but the in-person part of the job is where they thin out in smaller towns. Online-only means you measure, you order, and any error in either step is yours to absorb — on a $600 oversized shade that is an expensive lesson.
Franchise chains do send a consultant, but the person measuring is often not the person installing, and the appointment window in the north end of Durham can be weeks out. With us, the same person quotes, measures and installs, which is why a mis-mount is our problem and not a warranty argument.
If you are weighing a stock size against a made-to-measure order, our custom vs. ready-made comparison walks through where the ready-made option genuinely makes sense and where it does not.
Get my price range
Three fields, instant installed price range from our published pricing — then send it straight to Hayati on WhatsApp. Typical reply time: under 1 hour.
Keep reading
Frequently asked questions
- Do you charge extra to come out to Uxbridge or Port Perry?
- No. The in-home consultation, measuring and installation are included in the quoted price, with no travel or trip charge for either town.
- Can you cover very tall farmhouse windows?
- Yes. Tall narrow openings are common in both towns, and we spec the tube, chain and bracket hardware to the size so the shade operates smoothly and does not deflect over time.
- What is the best shade for a lakefront room with heavy afternoon sun?
- A 3% or 5% solar roller shade in most cases. It cuts glare and heat while keeping the view through the fabric. For bedrooms facing the water, a blackout roller on a side channel works better.
- How long does the whole process take?
- Typically 7–15 business days from approved quote to installation. We confirm the install date when the order is placed.
- Do you install in cottages and seasonal properties?
- Yes, including properties around Lake Scugog. We just need access to the home for the measure and again for the install.
Get a Free Quote on WhatsApp
Send a photo of your window and get an estimate within 1 hour.
